Integrated hot runner valve timing controller is introduced:

The timing controller is mainly applied to the needle valve type hot runner injection molding system, by detecting the injection machine mold injection signal, according to the customer need adjustable delay locking injection and different time close needle valveaction, accurate opening and closing the pneumatic type needle valve hot nozzle valve needle, to make products without connecting line objective. The time sequence controller has the following

Integrated hot runner valve timing controller:

1, with 4 time setting, in a work cycle can control the needle action two times ( if not two times, can be T3, T4 set to 0 ).

In 2, the input may switch or DC24V signal input, through the circuit board skippingconversion, convenient operation.

In 3, the output can choose AC220V, DC24V or switching output circuit board, through the "conversion, can be applied to any electromagnetic valve connection.

4, with A, B two kinds of work modes available for selection, parameter setting is simple,stable and reliable work.

5, manually opening valve function.

Power input: 200-240VAC 50/60Hz

Signal input: DC24V or switch input ( optional)

Control time period: T1, T2, T3, T4 four time

( T1, T3 as the delay time, T2, T4 rubber injection )

Time range: 0 - 900 seconds

Output mode: AC220V, DC24V or switching output