格润泰
热流道注塑科技有限公司,一直专注于热流道系统的研发、设计、生产和销售.此款一出四多点针阀整体式热流道系统适用于大部分塑胶,适合汽车模具塑件成型.阿诺立整体式热流道系统,熔体从分流板直接流进喷嘴,不会产生偏差以及流动死角,针阀式喷嘴采用气缸压缩气体的方式控制阀针运动,使产品清洁、无污染,此整体式热流道系统适合汽车保险杠、汽车仪表盘、汽车门板等.
格润泰热流道注塑科技有限公司一出四针阀整体式热流道系统方便客户拆装、节省时间、更利于保护热流道配件.阿诺立公司研发的整体式热流道系统采用高速车床加工,精度控制在±0.01MM,针阀式喷嘴的阀针采用德国进口,阀针硬度HPC60-62,表面镀钛,具有不粘料,高耐磨性,连续使用可达300万模次以上,而且封浇好,换色快.
★针阀整体式热流道不受浇口冷却时间的限制,缩短塑件成型周期.
★针阀整体式热流道材料浪费少,注塑产品的质量得到改善并更加稳定.
★针阀整体式热流道在低压下注射使注塑品在收缩时变形更小.
★针阀整体式热流道能实现每个注射口对塑胶注射量进行控制.
★针阀整体式热流道适合结晶速度快塑胶制成的注塑产品,适合由厚度大而闭模时间长的注塑产品,适合空气辅助注射的注塑件,适合薄壁注塑件等等.
Gerun Thai hot runner injection molding technology Co., Ltd., has focused on hot runner system of R & D, design, production and sales. This section of a four point needle valve overall heat flow channel system applicable to most of the plastic, suitable for automobile mould and plastic molding. Arnold integral hot runner system, the melt from the manifold directly flows into the nozzle, won't produce deviation and the flowing dead angle, nozzle using cylinder compressed air control valve needle movement, so that products are clean and free of contamination, the whole hot runner system for automobile bumper, dashboard, car door, and so on.
Gerun Thai hot runner injection molding technology Co., Ltd. a four needle integrated hot runner system convenient disassembly and assembly of the customers, save time, more conducive to the protection of the hot runner accessories. Arnold set R & D overall hot runner system using high speed lathe, precision control in + 0.01mm, nozzle needle valve needle adopts imported from Germany, the valve needle hardness HPC60-62, coated surface, with non stick material, high wear resistance, continuous use of up to 300 million or more times, and good encapsulation and fast colour change.
The advantages of coreter needle integrated hot runner system:
This needle hotrunner is not affected by the overall gate cooling time limit, shorten the molding cycle.
This whole needle hotrunner less waste of materials, improve the quality of the injection molding products and more stable.
This whole needle valve type hot runner injection under low pressure, the injection molding products in contraction deformation is smaller.
This whole needle type hot runner can realize each injection of plastic injection quantity control.
* needle integrated hot runner for crystallization speed made of plastic injection molding products, suitable for by large thickness and closed die a long time of injection molding products, suitable air assisted injection molding parts, suitable for thin-wall injection molded parts and so on.
精品展示
