加入收藏    | 设为首页     |     联系方式
精品展示
产品中心
联系方式
联系人:冯顺国
电 话:0512-50109099
手 机:13915753620
传 真:0512-50115803
地 址: 苏州市尚轻路36号
邮 编:215300
当前位置: 主页 > 热流道系统 >
热流道整体式系统           
详细介绍如下:
一种整体式热流道系统,包括分流板、安装在分流板中部上方的注射嘴及安装在分流板两端部下方的热嘴主体;该注射嘴经中心定位销固定在分流板的中部;在分流板上对应每个热嘴主体的上部还设有上垫块;所述主射嘴与热嘴主体与分流板内的流道连通;所述分流板、热嘴主体及上垫块三者为一体构成。所述每个热嘴主体上还套设有热嘴芯子盖。本方案将分流板、热嘴主体及上垫块采用一体式构成的整体结构,对模具加工精度的要求不高,加工工艺少,尺寸精度容易控制,且加热和感温元件较少,加工成本低。且配合面少,不容易出现漏胶的问题;另外,安装和维护都方便,且维护成本低。
An integral type hot runner system, including diversion plate, mounted on the splitter plate above the middle of injection nozzle is installed on the flow distribution plate at both ends of the lower part of the hot nozzle body; the injection nozzle center positioning pin fixed in the shunt in central; the diversion plate corresponding to upper part of each heat nozzle body is also provided with a cushion block; the injection nozzle and the hot nozzle body and the flow distribution plate within the flow channel is communicated; the diversion plate, hot nozzle body and a cushion block as one. Each of the hot nozzle body is also a hot nozzle core cover. The scheme will be diverted board, hot nozzle body and upper cushion block is composed of one type overall structure, on the mold machining accuracy requirement is not high, less processing, easy control of dimensional accuracy and heating and sense temperature fewer components, processing cost is low. And with a few, not prone to leakage problems; in addition, installation and maintenance are convenient, and low maintenance cost.



最近更新: 2016-01-04 20:29
上一篇:格润泰热流道喷嘴

下一篇:热流道整体式系统


Copyright © 2000-2015 格润泰科技有限公司 版权所有